Turbelle Stream 3 +

2.315,00 kr.

Ikke på lager

Forventet levering januar 2018

Electronically controllable synchronous motor pumps – Turbelle® controller included

The Turbelle® controller is a device which is used to set the variable pump performance. It can provide a wave simulation, oscillation flow, an automatic search for the resonance frequency when the oscillation flow is used, and it is also equipped with a food timer. It can be directly connected to a Multicontroller. The pump is therefore able to operate together with other pumps, for example, in the high/low tide mode. If the Moonlight 7097.050 (not included in the scope of delivery) is attached to the Turbelle® controller, the night-mode operation will be activated automatically. If this controller is connected to a second controller with the 7092.300 cable, a further pump can be connected and controlled, for example, to provide a wave pounding simulation or an oscillating current. A third controller can be added using the Y adapter cable 7090.300.
Turbelle® stream electronic are speed-controlled pumps operating on safety extra-low voltage, to be employed in every aquarium from 200 to 2,000 liters (52.8 to 528.3 USgal.) (6105) respectively over 3,000 liters (792.5 USgal.) (6155 and 6255) for simulation of lapping waves or tidal currents. It contains a new microprocessor-controlled motor and a Turbelle® controller. The electronic motor adapts its speed automatically to the pump load and always seeks the best efficiency at the lowest possible consumption of energy. This energy consumption is about fifty per cent lower than in conventional pump motors. The pumps will be stopped immediately in case of blockage. After the blockage has been removed, the pumps will start up automatically after a delay of 20 seconds. The pump driver has been provided with a fish care function, which causes a revolution of the spelling propeller every twenty seconds when the pump is at a standstill. Every Turbelle® stream electronic pump can be controlled by Multicontroller / SmartController 7000.

 

World novelty | The first magnetic-bearing Turbelle®

The new Turbelle® stream 3 precisely addresses the wishes of today’s aquaristics industry. It is also compact, powerful, versatile, and moreover
absolutely quiet thanks to its special magnetic-bearing pump drive. The stream 3 is energy efficient and has a warranty period of 5 years!

In 2002 TUNZE® presented a propeller-equipped circulation pump, and through this coined the name for a type of pump: The Turbelle® stream. Since then, TUNZE® has accomplished major developments in this area. The Turbelle® stream 3 is a completely new kind of circulation pump for small and large aquariums. With its innovative design, it can integrate almost invisibly into every aquarium. Thanks to the new magnetic-bearing pump drive, its superior feature lies in the completely silent operation – even at higher power levels. With a consumption of just 3.5 to 50 W, its performance can be set between 2,500 (660 USgal./h) to 15,000 l/h (3,962 USgal./h). It is delivered with the Turbelle® controller and a 5 m cable to the pump. The silence Magnet Holder ensures a fixation on every point of the aquarium glass pane up to a glass thickness of 15mm (2/3″). The new 0.8 Hz FishCare function prevents injuries to fish or other living animals. Every 24 hours, the pump automatically performs a 30-second backflushing operation with a capacity of 30%. The glass thickness can be expanded up to 19 mm (3/4 in.) for larger aquariums (accessory).

 

 

 

 

 

Adjustable and removable flow deflector, in order to
precisely adapt the flow to the aquarium. Through this, the stream 3 can also be arranged vertically and discreetly in a corner deeper in the aquarium.

 

Highly resistant polyurethane cable (5 m; 197 in.).

 

The acoustically optimized low-frequency propeller provides the best possible hydraulic performance.

 

The large intake strainer with massive locking hooks (snap fits), is easy to
remove, and can be fitted with a protective grating for small animals,
anemones, etc.

 

Hybrid support comprised of a suction cup and magnet.

 

Vibration decoupling through silicone buffers.

 

Microprocessor-controlled motor with an intelligent operating condition monitoring and highly efficient power electronics.

 

Operating time counter with LED-interface.

 

Wear-free magnetic bearing for a contact-free radial support which neutralizes motor noises.

 

The bearing is made of technical ceramics and high-performance plastic.

 

Durable outer housing in a high-gloss finish.

 

Intake opening for an optimal rotor cooling.

 

 

 

 

Turbelle® stream 3
(6150.000)

for aquariums up to 3.000 liters (793 USgal.)
Circulation performance: 2,500 l/h (660 USgal./h) to approx. 15,000 l/h (3962 USgal./h)
with Turbelle® controller
Energy consumption: from 3,5 to max. 50 W
Power supply: 100-240V / 50-60Hz
Cable length: 5 m
Dimensions (L x W x H): 93 x 70.6 x 184 mm (3.7 x 2.7 x 7.2 in.)
Silence Magnet Holder up to a glass thickness of 15 mm (2/3″) with flow deflector and protective grating.

 
 

Måske kan du også lide disse?

Indkøbskurv
Scroll to Top